tamberg.org

Work

Founder of Yaler.net
Maker / software engineer
"Professor of IoT" at FHNW
Let's collaborate in R&D projects
IoT prototyping to software architecture

Upcoming

Was macht "gute" IoT Produkte aus? at Winterkongress of Digitale Gesellschaft in Zürich, 23.02.2019
IoT Engineering, a new course at the FHNW School of Engineering in Windisch, starting spring 2019

Meetups

Organiser of IoT Zürich Meetup, @iotzh, since 2012
Organiser of 3D Printing Zürich Meetup, @3dzh, 2012 - 2016
Organiser of Hardware Startup Zürich Meetup, @hwstartupzh, since 2016
Organiser of Zürich Mini Maker Faire, @makerfairezh, w/ DIY Kultur Zürich, since 2016

Membership

Member of @robvank's IoT Council since 2014
Founding member and board of Verein DIY Kultur Zürich, 2016
Founding member of Open Network Infrastructure Association, 2016
Member of FabLab Zürich since 2012, member of the board since 2017
"Most active non-member" of SGMK (at MechArtLab OpenLab) since 2011

Materials

IoT Hardware for CS Bachelor Students for the upcoming IoT Engineering course at FHNW, 01.2019
System Programmierung, a course including hands-on tasks, held at FHNW since 09.2018
Kommunikation über MQTT, a lesson including hands-on tasks, held at FHNW, 04.2018
A simple reference model for connected products, referenced by iotmark.org Berlin version, 03.2018
Was ist ein FabLab?, an introduction to FabLab Zürich , 09.2017

Resources of Zürich Mini Maker Faire 2016, CC BY-SA DIY Kultur Zürich, 09.2016
LoRaWAN IoT with Arduino Uno, Dragino v1.3 & TheThingsNetwork, first held at the Workshop Days of /ch/open, 09.2016
LoRaWAN IoT Prototyping with Mbed & Semtech LoRa Shield, first held at FHNW for the iPOLE 2015 project, 10.2015
IoT Prototyping with Arduino, Particle Photon & IFTTT, first held at the Workshop Days of /ch/open, 09.2015
Internet of Things Workshop, first held with @iotzh at SGMK MechArtLab, 07.2012

Mentions

#MFZH18 was on Radio SRF, 18.09.2018, and on Heise.de, 20.09.2018
Algorithmically ranked #42 by Postscapes in its list of IoT Top 100 Influencers, W42 2017
#MFZH17 was in Netzwoche, 11.09.2017 and again 18.10.2017, and on Heise.de, 13.09.2017
Voodoo Sonic, presented at MakeZurich, was in Tagi, 30.01.2017 and in NZZ, 06.02.2017
#MFZH16 was in Sonntagszeitung, 18.09.2016, on Make and on Radio SRF, 20.09.2016
ESP Clock, made from 12 ESP8266, was on Hackaday, 26.11.2015
IoT Gauge with Arduino, Yaler and IFTTT was on the Arduino blog, 05.08.2015
Smart Homer Web-enabled TV Remote was on Hackaday, 14.10.2014
Augmented Water was on Wolfliving, 11.06.2014, on the Arduino blog, 09.07.2014 and on Hackaday, 19.08.2014
DIY 3D Tilt Sensor was a Global Fab Awards finalist in 2014, and on Hackaday, 01.07.2014
Motion Triggered Bed-to-Bathroom Floor Illumination was on Lifehacker, 06.02.2012

Presentations

Integration of Web Applications with The Things Network, at Switch IoT Day in Zürich, 22.11.2018
IoT Security Challenges at a panel on Minimal Security Standards for IoT in Bern, 12.09.2018
IoT Bottom-up Innovation at a panel on Benefits through Innovative Collaboration in Winterthur, 04.09.2018
Distributed LoRaWAN IoT Infrastructure at a meetup on Decentralized Urban Infrastructure in Zürich, 11.07.2018
#IoTMark, shaping better connected products (w/ text) at ThingsCon Salon in Cologne, 06.04.2018
Bottom-up LoRaWAN IoT Infrastruktur talk (w/ text) at Winterkongress of Digitale Gesellschaft in Zürich, 24.02.2018
#IoTMark, a certification mark for IoT (w/ results) at TheThingsConference in Amsterdam, 03.02.2018
IoT für KMU at Ligital in Vaduz, 04.05.2017
IoT & Maker Bewegung at Best Of Swiss Apps 2016 in Zürich, 16.11.2016
Internet der Dinge (w/ video), Jugend Hackt in Zürich, 12.11.2016
IoT und Maker Bewegung, eZürich ICT Cluster Dialog in Au, 23.09.2016
LoRaWAN IoT Infrastruktur at BAT Nr. 34 in Bern, 01.07.2016
Yaler in 3 minutes at SSUF IoT Summit in Zürich, 21.06.2016
IoT in der Schweiz (w/ text) at IT@8 of AdNovum, 09.06.2016
IoT Prototyping workshop talk at START Hack in St. Gallen, 13.03.2016
IoT Prototyping & Hardware Startups at Internet of Things Konferenz of Internet Briefing, 27.11.2015
LoRaWAN Hands-on with Mbed, Semtech SX1276 & ThingPark at a meetup of @iotzh, 29.09.2015
Internet of Things at Brown Bag Lunch of Technopark Zürich, 10.09.2015
Bottom-up Innovation, Hardware Startups & Maker Movement, lecture at #HWZDisrupt in Zürich, 04.09.2015
Beyond Mobile: IoT, Do-it-Yourself und Maker Bewegung at Fachevent: Mobile IoT of Smama.ch in Zürich, 20.08.2015
Open Source IoT & Bottom-up Innovation at Digicomp Open Tuesday in Zürich, 07.07.2015
Von der Basis: IoT, Do-it-Yourself und Maker Bewegung (w/ text) at HSG Alumni Forum in St. Gallen, 18.06.2015
UX Challenges in IoT and Connected Products at UXCamp Switzerland in Zürich, 16.05.2015
Hardware Startup Meetup introduction at the Kick-off of the Hardware Startup Zürich Meetup, 05.05.2015
The Internet of Things (w/ text) at Ignite Zürich, 27.03.2015
Das Internet der Dinge as a part of JT02 Factum Mobile of Grafisches Forum Zürich, 22.01.2015
Sensor-basierte Erweiterung von Web-Anwendungen at the IoT Konferenz of Internet Briefing, 02.12.2014
Building Connected Products, Open Lecture #5 at SUPSI, Lugano, 13.11.2014
#OktoberfestOfThings (w/ video) at the Pre-Work Talk of IXDS Munich, 18.09.2014
DIY Internet of Things & Bottom-up Innovation (w/ text) at the Ckster Hacking Festival in Bern, 06.06.2014
Call my Arduino (w/ video) at the demo session of IoTLive, 09.04.2014
IoT Connectivity (w/ text and video) at the MobileTech Conference 2014 in Munich, 18.03.2014
Open Source Internet of Things (w/ text) at the Open Business Lunch of Swiss Open Systems User Group, 06.02.2014
Das Internet der Dinge at vierter Clusterdialog 2013 of @AwaZurich, 18.09.2013
DIY Internet of Things und Bottom-up Innovation at the Web of Things Konferenz of Internet Briefing, 02.07.2013
Cuno's Open Source Hardware for Microsoft Gadgeteer at the Hardware Freedom Night of Dock18, 19.04.2013
IoT Art at a meetup of @iotzh, 29.01.2013
Wearing a SenseCam at the Inaugural Show & Tell of Quantified Self Zürich, 06.12.2012
DIY IoT Hardware and Bottom-up Innovation at a meetup of @iotzh, 31.10.2012

Podcasts

An interview (video part 1, part 2) by Daniel Boos (in Swiss German) for a workshop at Swisscom, 23.10.2014
Das Internet der Dinge, an interview (in Swiss German) for Ohrensausen by Andreas Ruoff from HyperWerk, 22.07.2014

Print

Interview by Dorothea Wurmbrand-Stuppach for Wirtschaftregional Liechtenstein, 04.2017
Loslegen Trotz Stolpersteinen, CC BY-SA tamberg.org (based on this), Swiss IT Magazine, 11.2015
Das Internet der Dinge, Vögele Kultur Bulletin Ausgabe 99, 11.2015
Gibt es ein Leben nach dem Studium?, Visionen Nr.2, VIS, ETH Zürich, 05.2014
Medienkulturgespräch: Internet der Dinge, CC BY Dock18, Fabrikzeitung Nr. 300, 04.2014

Projects

Crutchlet gait detecting crutch sensor and Twilio-based call triage, both at Arkathon in Sierre, 06.2015
PictureThis, interactive picture frame looking back (w/ @ram00n) at GLAMHack in Bern, 02.2015
MatchQuote, using a foosball table to browse historical soccer games at Make.OpenData.ch, 05.2014
Fabtronics, a collection of (3rd party) DIY 3D printed electronic gadgets, 2013-2015
OpenMedSensor, reverse engineering a heart rate sensor at Make.OpenData.ch, 09.2012
Tangible Statistics (intro slides) made with a 3D printer at Make.OpenData.ch, 03.2012
#BalanceShirt artifical wearable sense of balance, made at SUPSI summer school, 07.2012
#OktoberfestOfThings Internet-connected Masskrug & hackday (w/ @gy4nt et al.), 2012-2017
Smartphone hosted SMS Web service (background, writeup) at RHoK in Zürich, 12.2011
CH Euro Geigermaps, adding Swiss measurements, documented at Make.OpenData.ch, 03.2011
OpenLetten, freeing the Limmat temperature measurement at Make.OpenData.ch, 03.2011
Programming with Scratch, tutorials to teach programming at a local youth prison, 2011
Rfish.net RFID-based online swim lap counter & exploration of open design, 2009
Mobile Software Engineering blog hosted at Oberon, 2007-2009
More side projects...